Newport Vessels Kayak Trolling Motor

Newport Vessels Electric Kayak Trolling Motor

Get right on top of the big fish with this trolling motor and mount kit from Newport Vessels and you’ll be catching more trophies than ever!

The ultra efficient Newport Vessels 5-star rated Kayak Series 36lb Electric Trolling Motor will keep you fishing longer in fresh or saltwater. (See below for details.)

The Railblaza Kayak Transom Mount uses two sturdy StarPort HDs to securely outfit your kayak, this tested design can quickly be removed in under 30 seconds for easy transport, or to switch to a day of paddling.

All necessary hardware is included in kit. Install the Railblaza Transom Mount on your kayak, bolt on Newport Vessels Trolling Motor, add a battery and you’re ready! (Battery not included.)

Switch from paddle only, to motor ready in less than 30 seconds!

FAQs:

Will this mount work for canoes?Hi, The Railblaza Kayak Motor Mount is only designed to work on most kayaks. Installation requires drilling into the hull of your vessel and using fasteners on the underside to to properly secure it. Therefore, this type of installation typically does not work on canoes due to their hull design. For more information on this, you can check out their installation instructions here:https://newportvessels.com/content/Kayak-Motor-Mount-Instructions-227.pdf If you have any other questions or need additional help with anything else, please visit newportvessels.com or give us a call at (866) 721-0002! Our hours are M-F, 8:30am-4:30pm Pacific Time. Best,-NV Team

Will the kayak mount bolt to the Scotty mounts on my inflatable without any drilling or modifications?Hi, Based upon Railblaza's answer, it would be compatible with your scotty mounts. For more information, please view Railblaza's FAQ page:https://www.railblaza.com/faq/#:~:text=While%20the%20StarPort%20HD%20is,and%20looks%20better%20when%20fitted. Hopefully this helps! If you have more questions or need additional help, please visit newportvessels.com or email us at support@newportvessels.com! Our hours are M-F, 8:30am-4:30pm Pacific Time. Best,-NV Team

55lb trolling motor is not to heavy for the mount?Hi, No it is not. The 55lb trolling motor weighs 23lbs. The Railblaza Motor Mount (when correctly installed) can hold a 2hp gas outboard (roughly 30lbs). Hopefully this helps! If you have more questions or need additional help, please visit newportvessels.com or give us a call at (866) 721-0002! Our hours are M-F, 8:30am-4:30pm Pacific Time. Best,-NV Team

I have a new bk uh 184 9’2” sit on top fishing kayak . what do you recommend for a trolling motor and installation kit ?Hi, Because the top of your kayak is contoured with only a few flat surfaces and limited access to the inside of the hull, it might be difficult to instal the Railblaza Motor Mount. Installation of this mount requires flat surfaces on port and starboard sides and access to the inside of the hull where the bases will be mounted. Therefore, you might want to consider a motor mount that utilizes rod holder tubes instead. As for a motor, we would recommend our 36lb Kayak Series with 24" shaft or 36lb NV Series motor with 30" shaft. To determine the best shaft length, please see our SHAFT LENGTH GUIDE here:https://newportvessels.com/trolling-motor-shaft-length-guide/ Hopefully this helps! If you have more questions or need additional help, please visit newportvessels.com or give us a call at (866) 721-0002! Our hours are M-F, 8:30am-4:30pm Pacific Time. Best,-NV Team