The inflation process for inflatable paddle boards is often quick and straightforward, and many of these boards come with a manual pump that can fill a SUP (stand-up paddle board) in around ten minutes.
However, SUPers who are much younger or much older may find it challenging to inflate them, and some may like to spare themselves the exertion and sweat that comes with manually pumping the air into the board.
Alternately, if you are going to the lake to practice yoga or meditation, having to spend so much time and effort inflating a stand-up paddleboard is not exactly going to put you in a state of mind that is conducive to relaxation. So let's take a look at the top Inflatable Electric SUP Pump. Because of this, we believe that an electric pump is an essential item for everybody who uses an inflatable paddle board. You can inflate your paddleboard just as quickly with an electric pump as you can with a manual pump, but without the physical strain of having to do it yourself. Electric pumps can assist you in finishing the process of deflating your stand-up paddleboard (iSUP), ensuring that all of the air is removed so that it can be packed up exceptionally tightly at the end of the day. Traditional manual pumps are often larger and heavier, but some electric pumps are roughly the same size and weight, which makes them much simpler to pack and transport. Because some electric pumps come with an inbuilt battery or a portable battery, it is not even necessary to be in the vicinity of a vehicle in order to utilize them.
In practically every respect, an electric pump is superior to a manual pump, and many of them can be purchased for less than one hundred fifty dollars. On the other hand, much like inflatable SUPs, there are a plethora of choices when it comes to electric pumps. In order to help you make a more informed decision, we have compiled a list of the seven electric pumps that we consider to be the best and most highly recommended options for inflating paddle boards.
After four months of testing and going back and forth between many different electric pumps, we have finally settled on the Outdoor Master Shark II Air Pump as our new top-rated stand-up paddleboard (SUP) pump. In comparison to its first iteration, known as the Shark I, the Shark II incorporates what the manufacturer refers to as the "Shark Cooling System," which helps to keep the pump from becoming too hot. After conducting quite a few experiments, we discovered that we could pump up more stand-up paddle boards in succession with the Shark II than we can with any other electric paddle board pump. At first, we weren't sure whether or not this cooling system would be of any assistance. We also have not experienced any concerns with the pump's longevity, and we are pretty pleased with its other features.
This twin-stage automated electric pump has a maximum pressure of 20 PSI and can typically inflate a stand-up paddleboard (SUP) in 8 to 12 minutes. The OutdoorMaster Shark II air pump comes with a cable that can be plugged into a standard vehicle lighter; all you have to do is plug it in, and you'll be able to inflate one board after another.
The OutdoorMaster Shark II air pump features a side handle that is easy to grasp and comfortable to use.
Additionally, the power wire can be wrapped around the exterior of the pump with relative simplicity. The location of the power cord divides the two nozzles that may be used to inflate or deflate your stand-up paddleboard (SUP). Your PSI will be displayed on the digital display that is built into the Shark air pump, and you will be able to adjust the maximum PSI that is allowed for your stand-up paddleboard. Automatic functions for both the two-stage operation and the shutdown ensure that you won't leave the engine running for an overly long period of time or overinflate your inflatable paddleboard. If you keep the pump cold, you will most certainly be able to inflate three paddleboards without taking a break (during our testing, we were able to do more than four). However, we do recommend exercising some degree of caution as well. Even though this pump has a guarantee that lasts for a whole year, it is still an excellent idea to let the Shark II cool down for a few minutes after every two boards that you use it, even if it is a sweltering day outside. This is to be on the safe side.
Choose the OutdoorMaster Shark SUP if you need to inflate many stand-up paddleboards (SUPs) in a row at the same time. This model allows for continuous inflation.
The iROCKER 12 V electric pump comes in at number two on our list of preferred electric SUP pumps for 2022.
The iRocker electric pump is one of our favorites for some reasons, but the fact that it can be relied upon is the most important. Since I started using this pump about a year ago, I haven't experienced a single problem; it functions without any issues.
The iRocker electric pump has a maximum inflation pressure of 20 PSI and can often inflate a stand-up paddleboard in fewer than ten minutes. Out of the box, you have the choice between two different power sources. Using the alligator clips supplied, you may connect it to a regular vehicle lighter or straight to a 12 V battery. Lastly, this electric pump comes with a one-year guarantee from iROCKER, one of the most reputable SUP businesses and one of our top picks for firms with whom to collaborate.
The iROCKER 12 V electric pump is small and has the shape of a box, making it ideal for storing and guarding your power cables while not in use. This will prevent the wires from being tangled. This electric pump can both inflate and deflate, and it can generally increase two boards before having a rest. It is also capable of reducing boards. The digital LCD panel located right below the operating buttons allows you to establish a limit for the PSI and track your progress. This electric pump also features an auto-cut-off function, which ensures that you are filling your stand-up paddleboard with the ideal quantity of air at all times.
Check out the iROCKER 12 V Electric Pump if you're looking for an electric pump that not only delivers speedy inflation but is also supported by one of the most recognized manufacturers in the industry.
NIXY has made some notable changes with their new Ventus Paddle Board Pump; these improvements are so outstanding that we were almost tempted to put it higher than #3 on our list. Nevertheless, we decided to stick with our original ranking. The fact that we've only had the pump for roughly three months is the sole explanation for why we haven't used it yet. Even though we have put it through a tonne of testing, we still want to make sure that it can last as long as the iRocker and the Outdoor Master have. However, NIXY has introduced many features that I believe have the potential to be game-changers in the market for electric stand-up paddle board pumps. The major problem we have with pumps is that many of them can burn out if you don't handle them appropriately.
The fact that the Ventus pump comes with something that they refer to as "Active cooling tech" is the feature that has fascinated and pleased us the most. The function of this is essential to allow the engine to cool down. As I indicated before, pumps have a tendency to overheat; this function helps avoid that from happening while also allowing you to pump more boards.
It is pretty simple to put into use. Because the PSI level can be adjusted to accommodate any board you choose, and because it can go up to 20 PSI, it will function appropriately with any board that is now available.
Then, after you are through, you can wind the cord around the base of the pump and tuck the entire pump inside the bag that is provided for you. This will keep the pump clean and protected. The fact that this pump is one of the few that comes with its own bag really impresses us.
Using this electric pump, you will be able to inflate your stand-up paddleboard in ten to fifteen minutes if you have the Ventus. Your NIXY Elite electric pump comes with a plug-in that is compatible with vehicle lighters as well as alligator clips that may be used with 12 V batteries for alternative power sources. You'll have a full year to put the NIXY Elite iSUP electric pump through its paces and ensure that it meets your needs with the help of the included warranty. Automatically switching between rapid inflation at low PSI and more cautious inflation as the pressure in your inflatable SUP continues to develop is made possible by the two-stage function of the NIXY Ventus electric pump two-stage function. There is one nozzle for inflation and one for deflation, and they are situated on the front and the side of the pump, respectively.
The ERS 12 VDC electric pump is one of the portable electric SUP pumps that we suggest the most highly for the year 2022. Over the years, we have put many pumps to the test, and the ERS 12 VDC + Go emerged as our top pick due to its high efficiency and portability. If you are searching for a portable pump for your stand-up paddleboard (iSUP), then this would be our number one suggested alternative — I can't say enough about how much we adore the ERS + GO Battery!
The ERS 12 VDC pump is an electric pump with two stages that can inflate to a maximum pressure of 20 PSI. In order to achieve the most outstanding possible level of efficacy, the first stage of the ERS electric pump will include rapid inflation at the maximum possible rate. After this, the pump will transition automatically into a different gear, which will allow for more secure inflation at higher pressures. Although the ERS 12 V comes with a plug that fits any conventional car lighter socket, ERS also allows customers to purchase their GO batteries during the checkout process. On a single charge, the GO battery has the capacity to pump 6–8 SUP boards up to 15 PSI, and it also has three extra USB outlets that may be used to charge phones, speakers, and other electrical devices. The ERS electric pump and the GO Battery both come with a guarantee that is valid for an entire year from the date of purchase, providing you with ample protection in the event that something goes wrong.
The ERS 12 V pump may be used in either the inflation or deflation mode, and it is straightforward to use. After you have connected your hose to your stand-up paddleboard and inserted its end into the appropriate nozzle, you will be ready to inflate your SUP. A straightforward dial allows you to determine the maximum PSI to which you want to increase your inflatable SUP. Above the dial is a gauge that lets you watch the degree to which the SUP is being inflated. We have discovered that the ERS electric pump can successfully grow two stand-up paddleboards in a row without becoming overheated; however, on sweltering days, we do recommend giving it a little break after each inflation. Last but not least, once the appropriate PSI has been reached, this electric pump will cut off automatically, so there is no need to worry about overinflating the tire.
In a nutshell, the ERS 12 V DC is an electric pump that is simple to operate, portable, and high-quality. The ERS 12 V DC electric pump is an excellent option for customers who want something that is not just straightforward but also efficient.
The Atoll Bravo 2 Stage electric pump is an excellent choice if you are looking for a tiny and compact pump. This is a great pump if you need something that can be carried around easily because it is small enough to fit in the palm of your hand and comes with its very own Bravo bag.
The Atoll Bravo electric pump has an autonomous two-stage pumping mechanism that allows it to inflate smaller boards to 14.5 PSI swiftly. This is possible because of the pump's compact design. In order for the Atoll Bravo to function, it is necessary to have a direct connection to a 12 V battery; however, the power cable is 9 feet and 10 inches long, so you do not need to keep it immediately next to your vehicle. In conclusion, in addition to a sleek shoulder bag that makes it simple to carry, the pump comes with a warranty from Atoll, another respected maker of inflatable paddleboards that is good for sixty days.
The Bravo 2 Stage Electric Pump does not have a carry handle, but, given how compact and lightweight it is, you should have no trouble holding it in the palm of your hand even if it does not have a handle. The dial that is used to set the PSI limit is located directly above the pressure change, and the on and off switch is located directly below it for convenient access. Because of the feature of an automatic shutdown, you won't have to worry about the machine accidentally producing too much inflation either. On top, directly across from where the fan of the electric pump is placed, you'll find the two nozzles that control inflation and deflation. If you want the machine to be as effective as possible and allow the most incredible amount of air to flow through it, you need to ensure that the fan is not blocked. This is especially important if you want to try to inflate one board after another without giving it a break.
Choose the Atoll Bravo 2 Stage Electric Pump if you want an electric pump that is light, compact, and simple to transport.
There is the SereneLife Rechargeable Pump for optimum mobility if you are someone who wants to trek with their iSUP and won't have access to a car. This is an excellent option for those who are in this situation! Because it has a built-in battery, there is no need to connect it to an external energy source to inflate your SUP.
The rechargeable pump from SereneLife has a maximum PSI of 16, making it appropriate for the vast majority of different types of paddle boards. The built-in rechargeable battery is what sets this different from similar products. It makes it possible for you to inflate your paddle board even without a vehicle battery or a 12 V battery. If you neglect to give your battery a charge, you can always use the backup alternative of plugging it into a regular automobile lighter, just like most conventional electric pumps. The SereneLife Recharge Pump is a lightweight, portable electric pump that can fill most stand-up paddleboards in ten to fifteen minutes. In addition, the SereneLife Rechargeable pump comes with a 30-day trial period, during which you are free to test it out and send it back for a full refund if you decide you do not want to keep it.
If you prefer to carry it in your hand rather than on your back, the sleek carry handle on the SereneLife rechargeable pump can be folded into the pump itself. Inflation and deflation nozzles are located on the front of the pump, immediately below the LCD. These nozzles are located in the center of the pump. You can set your PSI and your remaining battery life with the LCD. You will also be able to switch on the LED flashlights above the nozzles on the pump. The power wire that can be used for either recharging the device or connecting it to a car lighter may be concealed by the orange SereneLife flap or the carry bag included with the purchase. If you keep the battery covered and cold, it should be able to inflate three to four paddleboards on a single charge. However, you shouldn't extend more than two paddleboards in succession to prevent the engine from overheating.
The rechargeable pump from SereneLife is the perfect choice if you need something that is easy to transport and does not need to be powered by a vehicle.
Thurso Surf is a different reputable company that manufactures stand-up paddle boards, and the quality of their product range extends down to the Thurso Surf SUP electric pump. With the Thurso Surf electric pump, inflating your paddleboard will be a breeze. Not only is it lightweight and simple to operate, but it also has a stylish and eye-catching color scheme. Most inflatable stand-up paddle boards (iSUPs) may be inflated in ten to fifteen minutes when using a cap with a pressure of fifteen pounds per square inch (PSI). If you aren't pleased with the Thurso Surf SUP electric pump, you can return it within 60 days for a full refund. All you need to do is plug it into a standard vehicle lighter, and you'll be out on the water in no time.
In addition to its emerald green hue, you'll note that the Thurso Surf SUP electric pump features a single nozzle for dispensing air. The electric pump is more compact and lighter than its manual counterpart, but it cannot deflate stand-up paddleboards. Regarding the screen, the built-in light will make it simple to see in both bright and dark environments, which will assist you in adjusting and monitoring the PSI of your inflatable stand-up paddleboard (iSUP). You won't have trouble inflating two stand-up paddle boards quickly if you ensure that the back air vent is exposed and keep the electric pump out of the direct sunlight. The Thurso Surf electric pump contains a feature that allows it to switch off automatically after the necessary PSI has been reached. This helps reduce the likelihood that the device would overheat.
Thurso Surf produces excellent inflatable stand-up paddleboards (iSUPs) and a superior electric pump.
There won't be a massive difference in performance between different electric air pumps designed for inflatable SUPs. Their forms will be somewhat other, some of them may inflate at a little faster rate, and their maximum PSI capacities will change. However, the length of time they will endure and the quality of customer support you will receive will differ depending on the manufacturer you choose to work with. The aforementioned electric pumps are highly recommended by our team, not only due to their excellent performance but also because reputable paddle board firms manufacture them. Suppose none of those mentioned above electric pumps are appealing to you. In that case, however, we suggest you read reviews of the companies that make the electric pumps and evaluations of the electric pumps themselves.
In the end, though, electric pumps are a fantastic feature that will make your time paddle boarding much more enjoyable than it already is. Inflating your stand-up paddleboard (SUP) won't require much effort; as a result, you'll probably save some time in the process. Electric pumps are more compact and lighter than their manual counterparts, making it much simpler to transport your stand-up paddleboard gear. Last but not least, each electric stand-up paddleboard pump discussed thus far has a function that allows you to deflate your paddle boards. This ensures that when you are ready to travel back home, your commission will be empty and ready to be packed away.
Due to the reasons discussed above, we believe that investing in an electric pump is the best investment you can make for your stand-up paddleboard (SUP) gear; nevertheless, these pumps require special attention when used. Electric pumps are dependable, but if you do not properly care for either the pump or your stand-up paddleboard, you will not only spend time attempting to inflate your board but also run the risk of doing lasting harm. We strongly suggest that you read the general advice we have provided below to get the most out of your electric pump's performance and avoid any long-term harm. You are welcome to leave a comment below or email us if you have any queries or are interested in learning more about paddleboards in general. Check this page regularly, as we will be adding new electric pumps regularly and updating it with the latest information.
We appreciate you reading this and wish you the best of luck on your SUP adventures!
Please make Sure the Air Valve is Sticking Up before Inserting: Before you attach your hose, make sure that your air valve is secured in the closed position, which for most SUPs, looks like it's sticking up. This will ensure that your hose will not leak. If you do this, inserting and twisting your hose will allow you to open up the air valve and close it off without losing air when you bend your hose back and remove it once you have finished inflating the item. If you do not do this, you will lose perspective when you twist your hose around and remove it after you have finished growing the thing. If you neglect to carry out this step, the pressure on your board may drop by 2-4 PSI, or even more, as you attempt to seal the open valve while simultaneously removing your hose. Before inserting the SUP into the water, you should always check to see that the air valve is in the up position. Be Cautious When Inflating Multiple Stand-Up Paddleboards in a Row: In typical conditions, the vast majority of the electric pumps you will find on the market can simultaneously inflate two stand-up paddleboards without the need for a break. Depending on the model of your electric pump, your electric pump may need to be turned off after inflating a single SUP for up to thirty minutes if it is exposed to direct sunlight, operated on sweltering days, or has a fan system that is clogged with debris.
Check the temperature of the electric pump after you have inflated your first stand-up paddleboard, paying particular attention to the areas around the hose and vents. If your electric pump is uncomfortable to touch or handle because it is too hot, it is unsuitable for inflating the next paddle board and should be replaced. Before moving on to the next panel, you should wait at least half an hour for the previous one to cool down. If you don't, the electric pump you're using can overheat, which might lead to temporary or permanent damage or even the complete failure of the pump.
A tarp and a blanket will work, but some SUP firms, like NIXY, provide their landing mats. These mats are not just the ideal size for your SUP but are also resistant to sand and water. When looking for an electric pump, if you don't already have a solution, we suggest you look at the NIXY landing mat or other SUP landing mats before making a purchase decision.
Inflate to the maximum PSI allowed, but don't exceed that limit: Some electric pumps have a maximum pressure of 15 PSI, while others may reach 20 PSI. Although it is convenient to have the capacity to inflate your paddleboard to a PSI higher than 15, you should not exceed the maximum PSI that is suggested for your board. In general, the more PSI in an inflatable SUP, the better its performance will be; but, if it is overinflated, items might explode and shatter, leading your inflatable SUP to be damaged beyond repair. Check the recommended PSI on your inflatable paddle board (iSUP), and inflate it to the top limit advised by it, which is often in the region of 12-15 PSI.
Use your electric pump to deflate: Many paddleboarders forget that they may use their electric pumps to help reduce their SUPs because it is pretty simple to deflate by hand merely. To complete the process of deflating your SUP, you will need to use your electric pump since it will be able to remove the remaining air that you cannot remove by hand. It will be a lot simpler to roll up and transport your inflatable paddleboard once it has been emptied of its contents. Because improperly deflating and storing a stand-up paddleboard can damage the board's form, using an electric pump will not only make your SUP last longer but also extend its lifespan. If you have an electric pump, you should never forget to use it to deflate your stand-up paddleboard.